Shilkaler stone tile adhesive

Min. Order:

Contact for details

Delivery time:

Contact for details

Main market:

VietNam, International

Contact infomation

Contact name: Mr. Thang (Eng/Viet)

Mobiphone:+84 913 130 209

Email: shilkaler@gmail.com

Product & service detail

SHIKALER STONE TILE ADHESIVE

1. General introduction:
- Shilkaler stone tile adhesive is a new technology adhesive with high plasticity, good adhesion strength, excellent slip resistance with ultra-thin paste. Shilkaler composition consists of cement mixture binder, dispersed polymer for film formation, mixed with grained quartz sand and other special additives.
- Application field: Shilkaler is used to glue, clad, paving, ordinary bricks with dimensions up to 100x100cm such as ceramic tiles, mosaic tiles, baked ceramic bricks and natural stones in the floor and wall areas, applied to Every location works indoors and outdoors.

2.Typical Shilkaler tile adhesive applications:
a. Indoor and outdoor floors:
- Concrete slabs, intermediate floor beams, concrete floors (Tiles and natural stones with dimensions of up to 100x100cm, ...).
- Coating of cement, sand and cement mortar lying on the ground (Brick and natural stone with the size <1000x1000mm).
- Floors with hot air duct system below.
b. Interior and exterior walls:
- Concrete wall, cement mortar (Brick & stone with size <1000x1000mm).
- Indoor plaster walls (Tiles have the largest size 300x300mm).
c. Old floors and walls that need renovation:
Shilkaler allows to be applied directly to the surface of old tiles & paving slabs without the need to tear down all old paving materials, including underlay mortar, old bricks and paving stones like traditional construction methods.

3. Outstanding advantages of Shilkaler stone glue:
- Excellent slip resistance with super thin glue.
- Good adhesion and no shrinkage when hardened.
- When mixed with water, forming a high plastic mortar mixture is easy to work with high productivity
- Paste large tiles, high-quality paving stones on new and old substrates of different porosity

4. Certificate of Shilkaler tile adhesive:
- Products conform to the TCVN 7899-1: 2008 standard.
- Products conform to the requirements of ISO 9001: 2008
Attention when using:
- Do not use for foundation, freezing or thawing.
- No need to soak bricks & paving stones into water before construction.
- No need to water the substrate before application.

5. Characteristics of tile adhesive products:

Form	Flour
Color	White or gray
Density (ton / m3)	~ 1,495
Water mixing ratio	~ 23% of dry glue weight
Curing time	> 8 hours
Construction time	40 minutes
Time for adjusting bricks	60 minutes
Time allowed to circuits on the floor	After 24 hours
Time travels gently on the floor	24 hours
Time allowed to use	14 days
Technical parameters
Tile adhesive in accordance with quality standards TCVN 7899-1: 2008
Note
Moisture resistant	Great
Anti-aging ability	Great
Resistant to solvents and oils	Very good
Resistance to acid and alkali	Is not
Permissible working environment temperature	+5 to + 45 degrees Celsius
Distortion ability	No deformation
Adhesion strength	Good
- Tensile adhesion strength	≥ 1.2 N / mm2
- Adhesion strength when immersed in water	≥ 0.9 N / mm2

Safety: Shilkaler is a cement based product, thus alkaline. Appropriate measures should be taken to minimize direct skin-to-skin contact.

For further details, please contact Shikaler Vietnam Co., Ltd.!