by Sylex Paint - Sylex Vietnam Company Limited — verified Vietnamese manufacturer
| Place of Origin | Vietnam |
| Brand Name | Sylex |
| Minimum Order (MOQ) | Contact |
| Supply Ability | Contact |
| Delivery Time | Contact |
| Certificate | TCVN 7239:2014, ISO 9001:2015, etc. |
| Main Market | Vietnam, FDI in Vietnam |
Easy Clean wipeable interior paint offers outstanding ease of cleaning, rapidly removing stains and keeping interior walls consistently pristine and aesthetically fresh like new.
By applying advanced technology, Sylex Easy Clean paint particles are bonded to form a specialized protective film, enabling effortless cleaning while effectively preventing dust and dirt adhesion.
Composition: Acrylic-based resin, mineral fillers, additives, and water.
Theoretical Coverage: 8 ÷ 10 ㎡/liter/coat
Outstanding Features
Maximum stain resistance
Health-safe formulation
Effective anti-mold protection
Matt finish
Ultra-easy wipeability
Excellent hiding power
Packaging / Volume: 5L / 18L
Application Instructions
Stir thoroughly before use.
Apply using roller, brush, or spray gun.
Thinning
The paint is manufactured ready for use after thorough stirring.
If dilution is required, do not exceed 10% clean water.
Drying Time: Surface drying time is approximately 45 minutes ensure an interval of 2 hours between coats.
Storage: Store the product in a dry, well-ventilated place. Keep paint containers upright and tightly sealed.
Recommended Coating System
For optimum results:
01 – 02 coats of Interior & Exterior Wall Putty
01 – 02 coats of Sylex Primer (alkali-resistant)
02 coats of Sylex Easy Clean topcoat
Surfaces must be clean, dry, free from peeling, and free of contaminants that may impair adhesion such as dust, grease, moss, or mold. Use appropriate chemical treatments to remove moss and mold. For chalking old wall surfaces, completely remove the existing paint film prior to application.
All cracks must be properly repaired before painting.
The moisture content of the wall surface must be below 16% as measured by a Protimeter moisture meter, or allow the surface to dry for at least 21 days under normal weather conditions (average temperature 30°C, ambient humidity 80%). Do not apply paint when the temperature is below 16°C or when ambient humidity exceeds 90%.
Please contact us via hotline for prompt assistance!
Get found by international buyers — list your business free in 2 minutes.
