by Sylex Paint - Sylex Vietnam Company Limited — verified Vietnamese manufacturer
| Place of Origin | Vietnam |
| Brand Name | Sylex |
| Application | Composition: Acrylic-based resin, mineral fillers, additives, and water. |
| Minimum Order (MOQ) | Contact |
| Supply Ability | Contact |
| Delivery Time | Contact |
| Certificate | TCVN 7239:2014, ISO 9001:2015, etc. |
| Main Market | Vietnam, FDI in Vietnam |
Sylex Nano Shield is a premium exterior topcoat paint featuring a brilliantly lustrous glossy film, designed to protect and enhance the architectural aesthetics of your building.
With breakthrough technologies offering UV resistance and anti-dust adhesion properties, Sylex Nano Shield serves as a robust protective barrier, safeguarding exterior walls against the adverse effects of harsh weather conditions.
Composition: Acrylic-based resin, mineral fillers, additives, and water.
Theoretical coverage: 12 ÷ 14 ㎡/liter/layer
Outstanding Features
Anti-dust adhesion
Resistance to algae and mold growth
Optimized thermal insulation
UV-resistant, long-lasting color retention
Resistance to cracking and peeling
High hiding power
Packaging / Net content: 1L / 5L / 18L
Application Instructions
Stir thoroughly before use.
Apply using roller, brush, or spray gun.
Thinning
The paint is manufactured ready for use after thorough stirring.
If dilution is required, add no more than 10% clean water.
Drying Time
Storage: Store the product in a dry, well-ventilated area. Keep paint containers upright and ensure lids are tightly sealed.
Recommended Paint System
For optimal results:
01 – 02 coats of Exterior Wall Putty
01 – 02 coats of Sylex Nano Seal Alkali-Resistant Primer
02 coats of Sylex Nano Shield Topcoat
Application Advisory
Surfaces must be clean, dry, free from peeling, and free of contaminants that may impair adhesion such as dust, grease, moss, or mold. Use appropriate chemical treatments to remove moss and mold. For chalking old wall surfaces, completely remove the existing paint film prior to application.
All cracks must be properly repaired before painting.
The moisture content of the wall surface must be below 16% as measured by a Protimeter moisture meter, or allow the surface to dry for at least 21 days under normal weather conditions (average temperature 30°C, ambient humidity 80%). Do not apply paint when the temperature is below 16°C or when ambient humidity exceeds 90%.
Please contact us via hotline for prompt assistance!
Get found by international buyers — list your business free in 2 minutes.
