%20(1)-images-203.jpg)
151B13B1 Advanced PID Temperature Controller
Product information:
- Supply Voltage: 110 - 240 VAC/DC
- Supply Variation: -20% to +10%
- Frequency: 50/60 Hz
- Control Action: ON/OFF (Symmetric/ Asymmetric), PID (Single/ Dual Acting) (Neutral zone only for dual acting)
- Tuning Method: Auto Tuning/Manual Tuning
- Temperature sensors/Inputs Thermocouple: J, K, E, S, B, R RTD: PT100 - 3 wire compensation Analog Signal DC: (0-50 mV, 0-60 mV,12-60 mV)
- Measurement Range:
• Sensor J: 0 to 700°C/32 to 1292°F, Sensor K: 0 to 1300°C/32 to 2372°F
• Sensor E: 0 to 600°C/32 to 1112°F, Sensor R: 0 to 1750°C/32 to 3182°F, Sensor S: 0 to 1750°C/32 to 3182°F
• Sensor B: 250 to 1820°C/482 to 3308°F, Sensor PT100 3 wire: - 200 to 700°C/-328 to 1292°F
- Measurement Accuracy: +/-0.5% of full scale of PT100, +/-1% of full scale for TC & mV signals
- Resolution: 0.1°C for RTD, J,E & 1° for S,B,K,R & 0.001°C for mV signals
- Configurable Set Points: 4
- Display: Dual row 7 segment display with LED indications, 4-digit process value, 4 digit set value
- Output 1: Analog: 0 - 10V DC/4 - 20 mA Configurable Retransmission Output
- Output 2: Relay: SPST 5A @ 240 VAC / 24 VDC
- Output 3: SSR: 12 VDC, 24 mA Short Circuit Protection
- Analog Output Update Rate: 150ms to 5s
- Alarm Types: Absolute (High/Low/Band), Deviation (High/Low/Band), Sensor Break, Loop Break,
- Soft Start Feature: Yes
- Ramp Soak Feature: 3 Ramp & 3 Soak
- RS 485 Communication: RS 485 Communication
- Transmission Speed & Type: 300 to 19200 BPS (Half Duplex)
- Transmission Protocol: Modbus RTU
- Operating Temperature: 0° C to + 50° C
- Storage Temperature: -20° C to + 60° C
- Humidity (Non Condensing): 80% (Rh)
- Enclosure: Flame Retardant UL94-V0
- Dimension (W x H x D) (in mm): 48 X 48 X 107.4
- Weight (unpacked) Approx.: 160 g
- Mounting: Flush
Contact Huy Phuc Automation for more information and consultation about the 151B13B1 Advanced PID Temperature Controller!