Self-clinching nuts

SELF-CLINCHING NUTS

1. Classify:

- Type S, SS, CLS, and CLSS nuts provide load-bearing threads in thin sheets with high pushout and torque-out resistance.

- Type SP, PEM 300® nuts provide strong load-bearing threads in stainless steel sheets as thin as .030”.

- Types S / SS are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 80 or less and HB (Hardness Brinell) 150 or less.

- Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.

2. Specifications:

- Thread size x pitch: M10 x 1.5

- Thread code: M10

- Shank code: 1

- A (Shank) Max: 2.21 m

- Rec. Min. Sheet thickness 1: 2.31 mm

- Hole size in sheet + 0.08: 14 mm

- C Max: 13.97 mm

- E ± 0.25: 17.35 mm

- T ± 0.25: 7.48 mm

- Min. Dist. Hole C/L to edge 2: 13.5 mm

- For use in sheet hardness 3: HRB 70 / HB 125 or less

- Thread specification: Internal, ASME B1.13M, 6H

- Fastener material: 300 series stainless steel

- Standard finish: Passivated and/or tested per ASTM A380

- CAD supplier: PennEngineering® (PEM®)

3. Note:

- For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.

- To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.

- HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.

For further information please feel free to contact FNF Viet Nam Co., Ltd!