FIREFIGHTING TROLLEY
Specifications
- The Firefighting trolley is equipped with CO2, O2, water, foam and "double hose reels" with AS-SN firefighting guns with oxygen masks to ensure safety for firefighters.
- AS-SN multi-purpose firefighting gun extinguishes fire with steam, dry gas does not wet property, computers, etc
Application
- AN SINH fire fighting trolley is used to extinguish electrical, solid and liquid fires. The vehicle is especially effective against petrol and chemical fires, pumping stations, motorbike garage basements, apartment floors of high-rise buildings, fires in factories, closed rooms, rooms with electrical equipment, etc.
Usage
- When a fire occurs, push the vehicle to approach the fire, if there is smoke, wear an oxygen mask and open the O2 valve.
- Open the CO2 valve, hold the firefighting gun towards the base of the flame:
+ If the fire is close and small: Open the sprinkler so that the nozzle spreads wide and quickly extinguishes the fire.
+ If the fire is high and large: Open the sprinkler to spray away.
+ Open 1 air valve to extinguish hyhobic fire.
- After use, close all valves, close the sprinkler, refill the extinguishing agent.
- When filling water: Open the water tank valve, drain all the air and then fill it with water, mix 0.3% Ansinh foam.
- Annually check oxygen and CO2, if it lacks, refill to make enough.
If you want to get any further information, please don’t hesitate to contact!
