CAR ELEVATOR
1. Introduction
- Car elevators are a type of cargo lift, so they are designed with specific requirements. The size and load of this type of car elevators must be suitable for groups of 4-seater, 7-seater or more cars, often used for apartment buildings, car parking areas, etc Specialized elevators s for lifting cars fast and accurate safety level. The driver only needs to control the car running into the elevator and at the same time operate the elevator.
2. Product description
- Depending on the architecture of the building, car elevators use the following types:
+ Traditional type: the gearbox is located above the lift pit, the engine room is required above the lift pit.
+ Type engine without gearbox, no engine room.
+ Type 1: 1 and 1: 2 hydraulic drive when the height of the lift pit is limited (OH ≤3600) low speed, using 2-3 floors.
- Cabin:
+ The cabin is designed firmly, safely to ensure durability.
+ The monitoring systems only run the elevator when the car has entered the elevator cabin position.
+ The elevator cabin can be designed with an inner door, and it can be designed without inner door.
+ Floor doors and cabin doors: Can design the types of doors:
• The doors open up and down, 1 wing, 2 wings or 3 wings. This type of door is designed when the lift hole has a limited width. 1-wing, 2-wing, 3-wing types are designed depending on the height between floors.
• 3-wing opening door, opening and closing in one side is designed when the height between floors is low.
• 4-6 wing opening door, centrally opening and closing controlled by the doors in the cabin.
- Because car elevators are designed to be suitable with high-rise premises, it is very diverse, so it is necessary to consult a specialist in each case.
Please contact us through our hotline or send us an e-mail for more information. We are very pleased to serve you!
