OLEX QUENCH OIL 125K

A quenching oil formulated with exceptional hardening characteristics and superior thermal stability, Olex Quench Oil 125k eliminates the risk of material distortion and cracking thanks to its advanced cooling properties. It is ideally suited for quenching applications where high surface finish is required, such as post-carburizing or carbon diffusion treatments of alloy steels. Discover more about Olex Quench Oil 125k with Max A Chau.

Key Features

• Delivers optimal quenching/cooling performance and thermal stability

• Maintains maximum hardness through rapid heat extraction

• Promotes uniform hardening – mitigates risks of deformation or cracking

• Low fire hazard due to high flash point

• Clean heat treatment – enhances surface brightness of finished products

Typical Properties

• Specific Gravity (15/4℃): 0.84

• Kinematic Viscosity (40℃, cSt): 16.3

• Flash Point (℃): 200

• Fire Point (℃): 224

• Color (ASTM): D8.0

• Total Acid Number (mg KOH/g): ≤0.1

• Residual Carbon Content (%): ≤0.1

Usage Guidelines

(1) Oil Concentration: Use undiluted.
(2) Operating Temperature: Maintain oil bath temperature between 60–80℃.
(3) Minimize water contamination. Water ingress diminishes cooling efficiency and may lead to:
– Poor surface brightness
– Ineffective quenching beyond a certain moisture threshold
– Cracking during cooling
– Risk of sudden boiling or vapor explosions
(4) Routinely remove sludge and metal debris from the oil bath to prevent accumulation, which can impair brightness and reduce cooling capacity.
(5) Conduct oil analysis if quality concerns arise.
(6) Store tightly sealed when not in use.
(7) Store drums in cool, shaded areas to prevent water contamination.

Max A Chau JSC is the exclusive, nationwide importer and authorized distributor of OLEX engine and industrial oils. As a leading supplier of premium-quality lubricants in the market, we are committed to delivering excellence in both product quality and value.